012345678901234567890123456789012345678901234567890123456789012345678901
[corelist]
Spectrum 48	zx48
Spectrum 128	zx128
Videoton TVC	tvc
Primo A64	primo
HT1080Z	ht
Homelab 3/4	hl3
Homelab 2	hl2
C= VIC20	vic20
C= 16/+4	c16
C= 64	c64
NES HDMI	nes
Homelab 3/4 720p	hlv14
TVC	tvcrgb
[end]
[config]
version=2
[end]
[zx48]
ZX Spectrum 48K with HDMI video/audio output. Clocking is the same
as original, CPU runs {f@3.5 MHz{., contended memory access like ULA.
Press {fF10{. to load games from the SD card.
You can also assign tape {eTAP{. files. Press {fTAB{. when the OSD menu is
active to switch between {e.SNA/.Z80{. and {e.TAP{. files.
SD card files accessed directly, original COPY command is replaced by
{fCMD{., where you can type dos commands.
E.g. 
CMD dir            - shows directory
CMD sna jetpac.sna - loads and starts jetpac.sna
{e.SNA{. and {e.Z80{. snapshots supported. Only 48K .Z80 files work.
See ZX manual for more details.

{4A small bug: If direct load by F10 fails, try again after reset{.

[end]
[zx128]
ZX Spectrum 128K with HDMI video/audio output. Original clocking.
Only {fTAPE{. file supported right now. Press F10 to select a Spectrum
Tape ({f.TAP{.) file, then use the loader to load games.
[end]
[tvc]
Videoton TVC 64K with HDMI and RGB output. Clocking is adjusted to
cope with HDMI, CPU runs {f@3.375 MHz{., no clock stretching implemented.
Press {fF10{. to load games from the SD card after reset ({fF9{.)
SD card files accessed directly, original LOAD and SAVE commands are
modified. Core handles {e.CAS{. files. DOS commands issued by LOAD, use
the format {fLOAD"*doscmd{., e.g. 
load"*dir  - executes {eDOS{. dir
load"fuss  - loads {efuss.cas{.
See TVC manual for hardware details.
[end]
[primo]
Primo A64 with HDMI video/audio output. Clocking is adjusted to
cope with HDMI, CPU runs {.@3.375 MHz{.. SD card files accessed directly 
by {eCMD{., original {eLOAD{. and {eSAVE{. commands are using TAPE files (.ptp). 
cmd"tape tapefile.ptp" - assigns the tape file, 
                         then SAVE and LOAD will work.
cmd"doscmd" - issues DOS commands, like cmd"dir"
Also, you can press {fF10{. to assign a {e.PTP{. file.
See the DOS manual for more info. See PRIMO manual for hardware details.
[end]
[ht]
HT1080Z 48K HDMI video/audio output.
{eLOAD{. and {eSAVE{. works with the files on SD card, {eCMD{. is for DOS commands. 
load"galaxy
cmd"dir
Closing " is not necessary for these commands. SAVE and LOAD works with
HT {e.CAS{. files.
See the DOS manual for more info. See HT manual for hardware details,
like changing colors, etc.
[end]
012345678901234567890123456789012345678901234567890123456789012345678901
[hl3]
Homelab 3/4 with HDMI and RGB video/audio output. 
Original LOAD and SAVE commands are modified in the ROM. Core handles 
.HTP  files. DOS commands issued by {eLOAD{., if a command is recognized, it 
will be executed, otherwise it tries to load as a {e.HTP{. file. E.g.:
load"dir - DOS dir
load"tie - loads tie.htp
Do not use closing " for load!
[end]
[hl2]
Homelab 2 with HDMI video/audio output. Machine has 16/32K RAM.
Original {eLOAD{. and {eSAVE{. commands are modified in the ROM. Core handles 
{e.HTP{. files. DOS commands issued by LOAD, if a command is recognized, it 
will be executed, otherwise it tries to load as a .HTP file.
E.g. load"dir   - DOS dir
     load"kildu - loads kildu.htp
See the Homelab2 manual for hardware details and extra registers.
[end]
012345678901234567890123456789012345678901234567890123456789012345678901
[vic20]
Commodore VIC20 with HDMI and RGB video, analogue audio. Machine starts 
with 5K RAM, that can be expanded by poking 1 to address 40000.
{ePOKE 40000,1{. then reset {e[F9]{. will turn on +32K.
Files on SD card directly accessed by @ command extender. 
Type {e@DIR{. for directory or {e@DIR A*{. for directory with pattern search.
@name tries to load a .PRG program, e.g. {e@BLITZ{.
Names can have patterns, too e.g. {e@ARC*{. will load the first .PRG file
that starts with 'ARC'
No 1541 drive support yet. Only {e.PRG{. files supported.
{f@LOAD{. and {f@SAVE{. implemented.
[end]
[c16]
Commodore 16/+4 with HDMI and RGB video, analogue audio. Original timing.
Press {fF10{. to load games from the SD card after reset ({fF9{.)
Files on SD card directly accessed by @ command extender. 
Type {e@DIR{. for directory or {e@DIR A*{. for directory with pattern search.
@name tries to load a .PRG program, e.g. {e@PAC-PAC{.
Names can have patterns, too e.g. {e@TUTTI*{. will load the first .PRG file
that starts with 'TUTTI'

For 1541 drive use {e.D64{. files. Press {fTAB{. when the OSD menu is active 
to switch between {e.PRG{. and {e.D64{. files.
{f@LOAD{. and {f@SAVE{. implemented.

{4A small bug: You may need to press F9 several times for a full reset.{.

[end]
[c64]
Commodore 64 with HDMI and RGB video, analogue audio. Original timing.
Press {fF10{. to load games from the SD card after reset ({fF9{.)
Files on SD card directly accessed by {f@{. command extender. 
Type {e@DIR{. for directory or {e@DIR A*{. for directory with pattern search.
@name tries to load a .PRG program, e.g. {e@BOULDER{.
Names can have patterns, too e.g. {e@GHOST*{. will load the first .PRG file
that starts with 'GHOST'

For 1541 drive use {e.D64{. files. Press {fTAB{. when the OSD menu is active 
to switch between {e.PRG{. and {e.D64{. files.
{f@LOAD{. and {f@SAVE{. implemented.

{4A small bug: You may need to press F9 several times for a full reset.{.

[end]
[nes]
Nintendo Entertainment System with HDMI output.
This cose use HDMI resolution {f1280x720p{.. Press {eF10{. to open a file browser
and load your favourite {e.NES{. rom.
Keyboard for Player 1: Cursor, Ctrl, Alt, Enter, Space
Keyboard for Player 2: W, A, S, D, Rifht Shift, Tab, 1, 2
[end]
[hlv14]
Homelab 3/4 with HDMI video/audio output. {f64K{. RAM HDMI {f1280x720p 50Hz{.
Original LOAD and SAVE commands are modified in the ROM. Core handles 
.HTP  files. DOS commands issued by {eLOAD{., if a command is recognized, it 
will be executed, otherwise it tries to load as a {e.HTP{. file. E.g.:
load"dir - DOS dir
load"tie - loads tie.htp
Do not use closing " for load!
See the DOS manual for more info.
{cThis core does not drive the RGB video output!{. 
There is only HDMI display. 
[end]
[tvcrgb]
Videoton TVC 64K with HDMI and RGB output. Clocking is the original, 
CPU runs {f@3.125 MHz{., but no clock stretching implemented.
Press {fF10{. to load games from the SD card after reset ({fF9{.)
SD card files accessed directly, original LOAD and SAVE commands are
modified. Core handles {e.CAS{. files. DOS commands via LOAD, use
the format {fLOAD"*doscmd{., e.g. 
load"*dir  - executes {eDOS{. dir
load"fuss  - loads {efuss.cas{.
See TVC manual for hardware details.
[end]
